2014 MAKO 21 LTS
2014 MAKO 21 LTS w/ 150 XL OptiMax Pro XS and Trailer

NO HAGGLE NO HASSLE™
National Special Price
$ 30,995* USA
Save $-5000


View Prices w/ Prep and Freight


Specials for this boat:
MAKO 21 LTS Savings Discount
Bass Pro VIP Discount Card - MAKO

Standard Features
Console(s)
Toe kick
Teleflex® hydraulic steering w/tilt wheel
Binnacle-mounted remote engine control w/power trim switch
6 anodized aluminum vertical rod holders
Analog tachometer, fuel gauge & water pressure gauge
Removable 72-qt. (68.14 L) forward-console cooler/seat w/integrated cushion
2 stainless steel drink holders w/drainage system
20.25" (51.44 cm) tall contoured, tinted acrylic windscreen
Dual battery switch & single battery rigging
Heavy-duty anodized aluminum grab rail
Area to flush- & surface-mount additional electronics
12V accessory jack
Hinged backrest cushion on front of console w/concealed 2-tray tackle storage for Plano 3600 Series boxes
Stainless steel destroyer-style steering wheel
Construction & Exterior
Marine-grade vinyl upholstery w/stain-resistant coating
NMMA certification
MAKO® White gelcoat
Molded, patterned non-skid deck & cockpit sole
Hand-laid hull, deck & stringer system
Fully molded composite deck w/integrated bow & stern casting platforms
Hull/deck joint chemically sealed & bonded 360° & mechanically fastened every 6" (15.24 cm) w/stainless steel fasteners
Integrated 1-piece molded fiberglass stringer grid system w/gelcoat finish & fully injected, closed-cell foam flotation
Encapsulated transom w/2" (5.08 cm) fiberglass-infused, high-density composite core
Non-marring vinyl rub rail
High-density, fiberglass-infused trolling motor mounting core
Helm seating & console mechanically fastened & chemically bonded to high-density composite core & .25" (.64 cm) aluminum backing plates
Aluminum backing plates laminated into bow & stern decks to accomodate fore & aft casting seat installations
Stainless steel fasteners throughout
Composite seat substrates
Marine-grade stainless steel hardware throughout
Electrical, Mechanical & Plumbing Systems
Marine-grade tinned wiring w/submersible connectors
USCG-compliant navigation lights
Engraved switch panel w/rocker switches & push-to-reset circuit breakers
6-circuit ATO/ATC distribution fuse block
2 cockpit courtesy lights
1,600 GPH (6,056.66 LPH) bilge pump w/auto switch
1,000 GPH (3,785.41 LPH) cartridge livewell pump w/auxiliary inlet port
High-speed raw water pickup
Marelon® "corrosion-free" seacocks on all thru-hull fittings below waterline
Self-bailing cockpit w/removable deck drain screens
EPA-compliant fuel system w/rotocast "corrosion-free" fuel tank
Interstate® cranking battery w/tray
Hardware & Accessories
.5" (1.27 cm) stainless steel bow & stern eyes
Powder-coated transom reinforcement plate w/MAKO logo
Seven 6" (15.24 cm) stainless steel low-profile pull-up cleats (fore, spring & aft)
Stainless steel fuel fill & vent fittings
Stainless steel & bronze thru-hull fittings
2-lb. (.91 kg) class BC fire extinguisher
Interior
Closed-molded laminate hatch covers w/finished undersides
Closed-molded coaming boards
136-qt. (128.70 L) center bow storage compartment w/locking stainless steel compression latch
90-qt. (85.17 L) port bow box w/stainless steel compression latch
90-qt. (85.17 L) starboard bow rod box w/stainless steel compression latch
Anodized aluminum helm seat frame w/4-rod rocket launcher & removable 94-qt. (88.96 L) "food & drink" cooler w/integrated seat cushion
Removable stern seat/livewell cushion
2 large aft guttered & gasketed lock-down dry storage compartments
Removable bow cast net storage tub
360° fishability
30-gal. (113.56 L) aft livewell w/Pro-Air® aeration system
Anchor locker
Performance
Factory-matched stainless steel propeller
MAKO factory engine pre-rigging
Legendary dry-riding MAKO hull design
Award-winning Rapid Planing System (RPS) transom
Trailer
Sure Lube hubs
Custom tandem-axle trailer
1,000-lb. (453.59 kg) capacity tongue jack
Dual-axle brakes
14" (35.56 cm) galvanized V5 wheels
Aluminum construction
Galvanized steel components
LED marker lights
PVC loading guides
Stainless steel hardware
Torsion axle suspension
NMMA certified
   
Options
Covers & Tops
Bimini top w/stainless steel frame $ 930
Ratchet cover—Black (fits boats w/ or w/out trolling motor) $ 750
Ratchet cover—Black (fits boats w/poling platform, w/ or w/out trolling motor) $ 800
Custom
Removable helm or stern seat backrest $ 280
Removable helm (1) & stern (1) seat backrests $ 530
Aft port & starboard casting deck jump seats $ 180
2-tone hull w/Gulfstream Blue, Onyx, Fighting Lady Yellow, Seafoam Green or Victory Red sides & transom $ 250
Bike seat w/seat, base, pole & spyder $ 145
Fore & aft bike seats (includes seats, bases, poles & spyders) $ 280
Tournament seat (includes seat, base, pole & spyder) $ 405
Fore & aft tournament seats (includes seats, bases, poles & spyders) $ 830
1 bike & 1 tournament seat (includes seats, bases, poles & spyders) $ 565
Deluxe tournament console grab rail $ 220
Poling platform (includes push-pole holders & dual rod holders) $ 1,500
Removable bow casting platform $ 545
Trim tabs (factory installed) $ 795
Electronics
Dual battery rigging $ 150
Guest 3-bank (30 amps total) battery charger $ 325
SmartCraft® digital gauges (OptiMax® rigging) $ 695
SmartCraft® digital gauges (150 XL FourStroke rigging) $ 730
Guest 4-bank (40 amps total) battery charger $ 465
Dual Pro® PS3 3-bank (45 amps total) battery charger $ 525
Dual Pro® PS4 4-bank (60 amps total) battery charger $ 575
Hardware & Equipment
Raw water washdown $ 170
Emergency ladder $ 225
Flush-mounted compass $ 145
Port & starboard side rails $ 200
Minn Kota® Talon 8' 4" (2.54 m) shallow water anchor $ 1,555
Power-Pole® Blade 8 shallow water anchor $ 2,530
2 flush-mounted aft rod holders $ 95
2 Minn Kota® Talon 8' 4" (2.54 m) shallow water anchors $ 4,155
2 Power-Pole® Blade 8 shallow water anchors $ 5,155
Minn Kota® Talon 8' 4" (2.54 m) shallow water anchor (mounted to optional jack plate—when ordered) $ 1,990
Power-Pole® Blade 8 shallow water anchor (mounted to optional jack plate—when ordered) $ 2,550
2 Minn Kota® Talon 8' 4" (2.54 m) shallow water anchors (mounted to optional jack plate—when ordered) $ 3,905
2 Power-Pole® Blade 8 shallow water anchors (mounted to optional jack plate—when ordered) $ 5,250
Performance & Steering
Custom stainless steel steering wheel w/knob $ 75
6" (15.24 cm) hydraulic jack plate (w/L6 Verado® rigging only) $ 1,725
8" (20.32 cm) hydraulic jack plate (w/all other rigging options) $ 1,425
Rigging
Remove MAKO turn-key installation (credit given) $-450
Trailer
Deluxe package w/tandem torsion axles, tandem-axle brakes, aluminum wheels & aluminum spare tire carrier & wheel/tire $ 1,000
Spare tire kit w/galvanized wheel & ST205/75R14 radial tire for standard trailer $ 180
Trolling Motor
MotorGuide® 24V, V75SW VariMAX®, 75-lb. thrust, 60" (1.52 m) shaft trolling motor $ 1,250
MotorGuide® 24V, W75SW wireless 75-lb.thrust, 60" (1.52 m) shaft trolling motor $ 1,375
Minn Kota® Riptide® SM 80 24V, 80-lb. thrust, 62" (1.57 m) shaft trolling motor $ 1,500
Minn Kota® Riptide® ST 80 Co-Pilot 24V, 80-lb. thrust, 62" (1.57 m) shaft trolling motor $ 1,875
Minn Kota® Riptide® I-Pilot ST 80 24V, 80-lb. thrust, 62" (1.57 m) shaft trolling motor $ 2,995
24V trolling motor pre-wire w/2 battery trays & concealed quick-connect receptacle $ 180
Dealer installed option pricing does not include labor for installation.
See your dealer for more details.