|
Standard Features
Console(s)
| Horn |
| Marine-grade tinned wiring w/submersible connectors |
| Trim tab switches w/position indicator lights |
| OEM digital instrumentation |
| Custom anodized aluminum tilt steering wheel w/knob |
| Double-wide forward-console seat w/storage compartment & 2 drink holders |
| Easy access to helm electronics, instruments & switches |
| Easy-access battery storage |
| Head enclosure w/molded liner, wiring access hatches, sink, removable storage pouch, mirror & double-gasket door |
| Integrated full-width fiberglass footrest w/non-skid surface |
| Recessed switch panel w/circuit breakers & engine ignition switches |
| Sink w/faucet & on-demand freshwater |
| Extra-large electronics mounting surface |
| Tempered safety glass windscreen w/aluminum frame |
| Hydraulic steering |
Construction & Exterior
| Aluminum backing plates for cleats, chocks & hinges |
| Hull/deck joint chemically sealed & bonded 360 degrees & mechanically fastened every 6" (15.24 cm) w/stainless steel fasteners |
| Recessed, pull-out boarding ladder |
| Closed-molded laminate hatch covers w/finished undersides & integrated gaskets |
| Heavy-duty rub rail w/stainless steel insert |
| Heavy-duty, fiberglass-encapsulated transom w/2" (5.08 cm) fiberglass-impregnated, high-density composite core |
| Integrated 1-piece molded fiberglass stringer grid w/gelcoat finish |
| Marine-grade stainless steel hardware |
| Marine-grade vinyl upholstery w/stain-resistant coating |
| 100% composite construction |
| NMMA certification |
| Available w/optional 2-tone hull color |
Interior
| Molded non-skid surface on walking flats, foredeck, gunwale tops, sole, stern platform & hatch covers |
| Self-bailing cockpit w/gutters, oversized drains & transom valves |
| Walk-thru transom w/latching door |
| Brushed anodized aluminum bow rail |
| Port & starboard bilge access w/removable covers |
| Freshwater shower w/pull-out spray head |
| Port & starboard under-gunwale rod racks for 6 rods up to 9' (2.74 m) long |
| Port & starboard tilt-out storage bins |
| 470-qt. (444.79 L) center bow in-deck storage compartment w/drain |
| Port, starboard & aft bolsters |
| Molded-in port & starboard stern platforms w/cooler-mounting flat between |
| 3 port & 3 starboard gunwale-mounted rod holders w/MAKO logo |
| Anchor locker w/protective inner liner |
| Fiberglass leaning post w/backrest, flip-up cushion, storage below & bait prep station w/freshwater sink, removable cutting board, 50-gal. (189.27 L) aerated anti-slosh livewell & tackle storage |
| Outrigger-ready T-top w/Black Weblon cover, 5 rod holders, electronics box, fluorescent light & 3 spreader lights (1 fore, 2 aft) |
| Port & starboard forward seats w/gravity overboard drainage |
| 4 drink holders |
| 390-qt. (369.08 L) insulated port & starboard aft in-deck fishboxes w/gravity drainage & diaphragm pump |
| Foredeck dodger mounting boss |
Mechanical, Plumbing & Electrical Systems
| Pre-wired for optional stereo system & speakers |
| Triple-battery rigging (2 cranking, 1 house) w/voltage sensitive relay (VSR) & emergency parallel switches |
| .188" (.48 cm) aluminum fuel tank w/4 baffles |
| 1,600 GPH (6,056.66 LPH) & 1,100 GPH (4,163.95 LPH) livewell pumps |
| High-speed raw water intake |
| Shut-off valves on all thru-hull fittings below waterline |
| Two automatic 2,000 GPH (7,570.82 LPH) bilge pumps |
| USCG-compliant navigation lights |
| Freshwater pump |
| Raw water washdown pump |
| Pre-wired circuitry for optional anchor windlass |
Performance
| Legendary dry-riding MAKO® hull |
| Aggressive deep V hull design |
| Recessed electric trim tabs |
| Factory-matched stainless steel propellers |
| Performance lifting strakes |
|
|
|
Options
Console & Navigation
| AM/FM/CD stereo w/4 speakers |
$ 945 |
| AM/FM/CD stereo w/4 speakers & Sirius Satellite Radio® |
$ 1,250 |
| Electric head w/overboard discharge |
$ 1,695 |
Covers
| Console & fiberglass bait station covers |
$ 1,100 |
Cushions & Seating
| Bow cushions |
$ 695 |
| Removable folding rear bench seat |
$ 1,000 |
| Bow seat & side coaming bolster cushions |
$ 1,245 |
Hardware & Equipment
| Removable stainless steel boarding ladder |
$ 500 |
Trailer
| Aluminum triple-axle EZ Loader® aluminum trailer w/triple-axle disc brakes & stainless steel hardware package |
$ 9,700 |
Custom
| CE certification |
$ 280 |
| Anti-fatigue deck mat w/MAKO logo |
$ 190 |
| Delete engine turn-key (credit given) |
$-250 |
| 220V onboard Euro battery charger |
$ 750 |
| 18-amp triple-output onboard battery charger w/indicators & remote inlet connection |
$ 400 |
| Anchor roller, windlass & rode |
$ 1,500 |
| 2-tone hull w/Gulfstream Blue, Onyx, Fighting Lady Yellow, Seafoam Green or Victory Red sides & transom |
$ 940 |
Covers & Tops
| Outriggers |
$ 1,700 |
| T-top enclosure & gull wings |
$ 1,250 |
| Fiberglass hardtop w/anodized aluminum frame, port & starboard outrigger mounting plates, 3 spreader lights, navigation light, electronics box & 5 rod holders (exchange for standard canvas T-Top). |
$ 4,375 |
| Delete standard canvas T-Top |
$-4,315 |
Dealer installed option pricing does not include labor for installation.
See your dealer for more details.
|
Help chat
