|
Standard Features
Hardware & Accessories
| .375" (.95 cm) stainless steel bow & stern eyes |
Mechanical & Plumbing Systems
| 1,000 GPH (3,785.41 LPH) bilge pump w/auto switch. |
Center Console Command Helm
| Elevated fiberglass console w/integrated baitwell |
| Stainless steel grab rail |
| 2 drink holders |
| Navigation lights, horn & fire extinguisher |
| Non-skid console top surface w/integrated step |
| 9 vertical flush-mounted rod holders |
| Binnacle-mounted control w/power trim |
| Back & bottom seat cushions w/marine-grade vinyl & composite bases |
| Lockable glovebox/small items storage |
| Speedometer, tachometer, trim gauge, fuel gauge & voltmeter |
| Removable contoured windscreen |
Construction & Exterior
| 6" (15.24 cm) stainless steel cleats |
| Non-glare, slip-resistant gelcoat interior |
| Bow casting deck |
| Hand-laid hull & deck |
| Heavy-duty rub rail |
| Rugged shallow-drafted, flotation foam-injected V hull |
| Self-bailing deck |
| Stainless steel hardware & fasteners |
| Stern platform |
Electrical
| Console-mounted courtesy lights |
| Marine-grade rocker switches |
| Cranking battery w/tray |
| Pre-wired for 12V or 24V trolling motor system |
| Circuit breaker protection |
| 12V outlet |
Hardware & Accessories
| Fuel fill w/integral vent |
| Stainless steel hardware & fasteners |
Interior
| Bow storage area w/access hatch |
| Port & starboard forward storage boxes w/cushions |
| Flip-flop helm seat w/94-qt. (88.96 L) cushioned cooler |
Mechanical & Plumbing Systems
| 23-gal. (87.06 L) aerated console baitwell |
| 60-gal. (227.12 L) in-floor fuel tank |
| Hi-speed freshwater pick-up |
System, Mechanical & Plumbing
| Teleflex® dual-cable, no-feedback steering |
Trailer
| Custom tandem-axle trailer w/EZ lube hubs & GALVASHIELD® protection |
|
|
|
Options
Custom/Performance
| Remote oil fill |
$ 105 |
| Hydraulic jack plate |
$ 1,075 |
| Aluminum leaning post w/tray |
$ 275 |
| Aluminum leaning post shotgun stand |
$ 470 |
| Manual jack plate |
$ 330 |
| Aft cushion w/fastener |
$ 155 |
| Tournament seat (includes seat, base, pole & spyder) |
$ 205 |
| Aluminum leaning post w/tray & footrest |
$ 390 |
| Bike seat w/seat, base, pole & spyder |
$ 155 |
| 94-qt. (88.96 L) cooler w/seat (installation extra)
|
$ 260 |
| 94-qt. (88.96 L) cooler w/out seat (installation extra)
|
$ 140 |
| Aluminum leaning post w/tray & 4 dealer-installed rod holders |
$ 445 |
| Aluminum leaning post w/tray, footrest & 4 dealer-installed rod holders |
$ 565 |
| Rear bench seat (only w/built-in center baitwell) |
$ 465 |
Steering
| Hydraulic tilt steering |
$ 780 |
| Dual-cable, no-feedback tilt steering |
$ 115 |
| Hydraulic steering. |
$ 530 |
Electronics
| Lowrance® X67C depth finder |
$ 380 |
| Lowrance® HDS-5 depth finder |
$ 940 |
| Lowrance® X50 DS depth finder |
$ 140 |
Plumbing
| Console baitwell w/recirculator |
$ 50 |
| Aft baitwell w/recirculator |
$ 50 |
| Aft Fish O2™ oxygen generator |
$ 1,115 |
| Console Fish O2™ oxygen generator |
$ 1,115 |
| Aft baitwell w/Max-Air™ system |
$ 55 |
| Aft baitwell w/Pro-Air system & recirculator |
$ 170 |
| Console baitwell w/Max-Air™ system |
$ 55 |
| Aft baitwell w/Pro-Air system |
$ 120 |
| Console baitwell w/Pro-Air system & recirculator |
$ 170 |
| Console baitwell w/Pro-Air system |
$ 120 |
Custom
| Bimini top |
$ 805 |
| Swim/wade platform |
$ 250 |
| Side rails |
$ 315 |
| Console door |
$ 125 |
| T-top |
$ 4,020 |
| Stainless steel rub rail |
$ 205 |
| Rear boxes/port baitwell |
$ 205 |
| 6" (15.24 cm) stainless steel cleats |
$ 70 |
| Small anchor kit |
$ 70 |
| Swing-out rod holders |
$ 120 |
| 2-tone hull |
$ 250 |
| Dual Pro® built-in 1-bank battery charger |
$ 145 |
| Dual Pro® built-in 2-bank battery charger
|
$ 315 |
| Water pressure gauge (installation extra) |
$ 70 |
| Dual Pro® built-in 3-bank battery charger
|
$ 405 |
| Rear deck pro. package (must purchase built-in center baitwell)
|
$ 500 |
| Stainless steel console rod holders |
$ 45 |
| Aft deck w/ built in center baitwell |
$ 555 |
| Aft deck w/ built in port baitwell |
$ 480 |
Trolling Motor
| Minn Kota® RT80 Riptide® 24V, 80-lb. thrust, 52" (1.32 m) shaft trolling motor w/Bowguard 360°® mount |
$ 1,040 |
| MotorGuide® SW71 Great White Saltwater Series 24V, 70-lb. thrust, 50" (1.27 m) shaft, bow-mounted, hand-controlled trolling motor |
$ 770 |
| MotorGuide® SW82 Great White Saltwater Series 24V, 82-lb. thrust, 60" (1.52 m) shaft, bow-mounted, hand-controlled digital trolling motor |
$ 1,055 |
Trailer
| Spare tire kit for EZ Loader® trailer |
$ 245 |
| Tandem-axle EZ loader® 2-brake upgrade |
$ 420 |
| Tandem-axle EZ loader® deluxe brake upgrade
|
$ 575 |
| Tandem-axle EZ loader® deluxe 2 brake upgrade
|
$ 980 |
Rigging
| MAKO Remove Turn-Key Installation for Mercury®, BRP Suzuki® (credit given) |
$ 250 |
Hardware & Equipment
| Lenco trim tabs |
$ 630 |
| Emergency ladder |
$ 240 |
| Large anchor kit |
$ 80 |
| Small anchor kit |
$ 70 |
Dealer installed option pricing does not include labor for installation.
See your dealer for more details.
|
